RISCO Group RVCM52E Guia De Instalacion página 7

Powering-up the IP Camera
Connect the camera power adapter to an electrical outlet.
Connecting the IP Camera to the Network
The IP camera supports a LAN network connection.
Connecting to a LAN Network
Connecting the IP camera to a network using the LAN (Local Area Network)
enables easy connection and setup with compatible APs (Access Points), e.g.
gateway or router.
1. Connect the incoming network cable to the Network port on the IP camera.
2. Wait just a few minutes while the IP camera automatically connects to the
RISCO Cloud.
3. Define the IP camera settings (Refer to Defining IP Camera Settings).
NOTES:
1. In order to connect the IP camera to RISCO Cloud via UPnP, the router should
be UPnP certified. If your router is not UPnP certified, we recommend not to use
UPnP and to open camera ports manually in the router (See Troubleshooting
section for more information).
2. The IP camera cannot be connected to more than one router.
7