USER MANUAL
Fig. 11
Attention
Mechanical hazard: Avoid shaking or dropping the driver!
Step 3. Mounting the lighting fixture
Mount with fixture hanger A (Part E) as Fig. 12, or mount with fixture hanger B (Part F) as Fig.
13. Fixture hanger B (Part F) allows truss to run through fixture body in this mounting way.
Step 4. Connect LED lighting fixture to the driver
As Fig. 12, plug in the DC cables of lighting fixture to driver's DC connectors. Spin the orange
cap till tight. Make sure each cable plugs into its adjacent connector.
Fig. 12
Step 5. Connect the fixture to the power, as Fig. 13.
28mm
44mm
Fig. 13
DC connection
AC input power connection
13
TM