Ce, Declaration Of Conformity; Safety - Nederman Fan Starter 5.5 Manual De Instrucciones

This product is designed to meet the requirements of the relevant EC directives. To maintain this
status all installation, repair and maintenance work must be carried out by qualified personnel using
only original spare parts. Contact your nearest authorised dealer or
AB Ph. Nederman & Co. for advice on technical service or if you require spare parts.
Declaration of conformity
We, AB Ph. Nederman & Co., declare under our sole responsibility that the Nederman product:
- Fan Starter Art. No 14514837
to which this declaration relates, are in conformity with
the following standards or other normative documents:
EN 50 081-1, EN 50 082-2, EN 60 439-1
following the provisions of Directive
89/336/EEC, 92/31/EEC, 73/23/EEC
AB Ph. Nederman & Co.
Sydhamnsgatan 2
SE-252 28 Helsingborg Sweden
2002-04-02
Alf Jonasson, Product Manager

SAFETY

Warning Only a competent electrician may install the Fan Starter.
Warning! If start signal is activated the fan will automatically start after a voltage
drop out.
Warning! At any work on the installation the main switch must be switched off and
locked.
Warning! A separate safety/maintenance switch shall be installed close to the fan,
if the fan and the Fan Starter are mounted in different locations.
Warning! Even when the Fan Starter is powered down, there may be external
control voltage at terminal X1.
Fan Starter 5.5
ENGLISH
4