Installation Procedure - Toto Legato TS624F2 Manual De Instrucciones Y Del Propietario

1) Plumb a 1/2" NPT male nipple (not
included) extending between 3/8"
(10mm) and 7/8" (22mm) beyond the
finished wall surface.
NO TE: The hole for the nipple should
not be larger than 1" (25mm) in
diameter.
Wrap the threads of the nipple with
pipe tape, then thread the adapter
onto the nipple, taking care not to
damage the o-ring.
2) Slide the elbow over the adapter with
the outlet facing downwards until it is
flush against the wall. Secure it with
the set screw.
Attach the small end of the handshow-
er hose to the elbow outlet.
3) Attach the handshower bracket to the
wall in the desired location using the
included hardware and wall anchors (if
necessary).
4) Connect the handshower to the free
end of the handshower hose and place
it in the handshower bracket.

INSTALLATION PROCEDURE

4
1/2" NPT
Male Nipple
3/8" (10mm) to
Adapter
7/8" (22mm)
Screw
Handshower
Handshower
Bracket
Set
Screw
Handshower
Hose
Finished Wall
Surface
Adapter
Elbow
Set
Hose
Bracket
Base
Handshower