1. INTRODUCTION AND SAFETY
Thank you for purchasing this product.Please read these instructions, and keep them for
future reference.
This tool is an electric pump. It is used for pumping water and other similar water
applications.
After opening the package, please ensure that the products are complete (if any).
If the products are damaged or there is something missing, please do not use it and bring
it back to your dealer.
If you give this tool to another person, please give him this instruction manual.
Safety Instruction
1. All electrical sockets must be earthed.
2. No power cord should be used for transporting or fixing the equipment.
3. Don't pull the power cord on the sharp edge and don't press the power cord.
4. The power supply voltage must be the same as the voltage given on the model
board.
5. To avoid hazards, all installation and replacement of compo- nents can only be
carried out by authorized customer service personnel.
6. Electrical connections can only be performed by electrical professionals, and
please comply with state regulations for this.
7. The pump must be connected with a current type leakage current breaker which
carry a rated leakage current of no more than 30 MA.
8. Check the connection of the plug before running. If the wire is damaged, it must
be replaced by the manufacturer, the agent or the relevant technical personnel
to avoid any danger.
9. The device is suitable for children at eight or older. People with sensory or
physical disabilities or deficiencies are required to use under supervision or
knowledge of safety, use and danger. Children are not allowed to wash or
maintain equipment without supervision.
10. Liquid contamination may be caused by leakage of lubricat- ing oil.
11. The water pump can be connected with a shock proof plug installed in
accordance with the regulations.
12. Do not use pumps when there is someone in the water.
13. When cleaning and maintaining, please disconnect the water pump from the
main power supply.
14. Please contact technical staff.
15. Connectors for power plugs and extension cables must be made sure that they
are watertight and must not be placed in the water. Furthermore, connectors
cannot be placed on the ground. It is recommended to ensure that the outlet is
at least 60 mm from the ground.
None follow of the safety
tips will have the life risk
brought by the current!
ATTENTION!
Danger type and source:
None follow of the safety tips will have the life
risk brought by the current!
Do not repair the power cord if there is any
DANGER!
external damage to the power cord or plug.