CARE RECOMMENDATIONS
USING THE CLEAN FUNCTION
After 300 cycles, the CLEAN function will appear in the display as a reminder to clean
the inside of the Coffee System. The Coffee System will perform 3 stages of cleaning.
Cycle 3 performs a 20-minute soaking cycle to help remove mineral deposits. Cycles 2
and 1 rinse the vinegar from the Coffee System.
To prevent vinegar from getting into water filter, remove water filter from the reservoir.
1.
Turn mode selector bezel to the CLEAN position. Pour 3/4 cup (177 ml) of plain white
2.
vinegar into the water reservoir. Fill to the CLEAN line with cold water. Place water
reservoir into the Coffee System.
Press START/STOP. The display will show the number 3
3.
and start a timer for 20 minutes. During this time the Coffee
System will cycle the heater to help remove mineral deposits
from inside the Coffee System.
At the end of the cycle the display will show ADD WATER
4.
and the number 2.
NOTE: Be sure to empty the carafe before starting
Cycle 2.
Fill to the CLEAN line with cold water. Place water reservoir
5.
into the Coffee System.
17