CARE RECOMMENDATIONS
WARNING
Electrical Shock Hazard:
Do not clean with metal scouring pads. Pieces can break off pad and touch electrical
parts, causing a risk of electric shock.
Your oven should be cleaned regularly for best performance and long life. Regular
cleaning will also reduce the risk of fi re hazard.
BEFORE CLEANING
Unplug oven and let cool.
1.
CLEANING
Control Panel
Wipe with a slightly damp sponge. Protect display when cleaning any other
Display
surfaces.
Stainless Steel
Use a nonabrasive stainless steel cleaner and apply with a soft lint-free cloth.
Exterior
To bring out the natural luster, lightly wipe surface with a water-dampened
microfi ber cloth followed by a dry polishing cloth. Always follow the grain of
stainless steel. Clean using a soft, nonabrasive stainless steel cleaner like
Signature Polish. Apply with a soft, 100% lint-free cloth. Signature Polish can
be ordered via their website at www.signaturepolishonline.com.
Non-Stainless
Wipe outside of oven with a damp cloth. Do not use abrasive cleansers or metal
Steel Exterior
scouring pads. Or, spray with all-purpose cleaner. Wipe clean with a lint-free cloth.
Interior of Oven
Allow to cool completely before cleaning. To clean inside of oven, wipe oven
walls and bottom of oven with a damp, soapy cloth. Repeat with a damp, clean
cloth. For stubborn stains, use a plastic scouring pad.
Glass Oven
When window is cool, use a razor blade to gently lift baked-on foods. Spray
Window
glass cleaner on cloth to clean. Wipe with a damp sponge to rinse. Dry
thoroughly with a clean cloth.
Oven Racks and
Clean with a mild abrasive cleaner. Wipe with a damp sponge to rinse. Dry
Side Rack Guides
thoroughly with clean cloth.
Crumb/Drip Tray Dishwasher-safe. Or, hand wash in soapy water, rinse, and dry thoroughly.
Baking Pan and
Dishwasher-safe. Or, hand wash in soapy water, rinse, and dry thoroughly
Broil Rack
Control Knobs
Wipe with a damp, soapy cloth. Repeat with a damp, clean cloth. Dry
thoroughly with a clean cloth.
Probe
Clean the plug end of probe with soapy water. Rinse and dry thoroughly with a
clean cloth.
REMOVING THE HALOGEN LIGHT BULB
NOTE: When replacing the halogen bulb it is necessary to use a soft clean cloth when handling the bulb.
Unplug the oven and allow to cool completely.
1.
Locate the oven light in the back right side of the oven.
2.
To remove the glass cover, unscrew the cover by turning counter clockwise and remove.
3.
To remove the halogen light bulb, gently pull the bulb straight out. Do Not attempt to
4.
unscrew the bulb.
REPLACING THE HALOGEN LIGHT BULB
To replace the standard 25 W G9 halogen bulb, carefully align and push the prong end of
1.
the bulb into the socket in the back right side of the oven.
Place the glass cover over the bulb and turn the cover clockwise until tight.
2.
22