Models - Ecler UMA Serie Manual De Instrucciones

4. MODELS

UMA112
Loudspeaker with 15mm thick, high quality plywood. Contains a 12'' woofer. Ceramic
magnet with 77mm coil. The high way wears a 1'' compression driver with mylar diaphragma,
attached to a 90ºx40º diffusor with constant directivity. Trapezoidal shape.
Provides lateral handles and an additional handle on the back side with Speakon
connectors for signal input and stack output. Allows stackage on subwoofer unit UMA SB118.
UMA115
Loudspeaker made with 15mm thick, high quality plywood. Contains a 15'' woofer.
Ceramic magnet with 100mm coil. The high way wears a 1'' compression driver with mylar
diaphragma, attached to a 90ºx40º diffusor with constant directivity. Trapezoidal shape.
Provides lateral handles and an additional handle on the back side with Speakon®
connectors for signal input and stack output.
The models UMA112 and UMA115 have a presence selector for high frequencies on the
backside that allows adapting of the high frequency response of the loudspeaker to the application
or to the character of the room the speakers are installed in.
UMA215
Loudspeaker made with 15mm thick, high quality plywood. Contains a double 15'' woofer.
Ceramic magnet with 100mm coil. The high way wears a 1'' compression driver with polypropylene
diaphragma, attached to a 90ºx40º diffusor with constant directivity. Trapezoidal shape.
Provides lateral handles and an additional handle on the back side with Speakon
connectors for signal input and stack output.
UMA SB118
Subwoofer unit. Loudspeaker made with 15mm thick, high quality plywood. Contains an
18'' woofer. Ceramic magnet with 100mm coil. Wears a 35mm pole socket that allows to easily
stack additional units as well as UMA112 boxes. Equipped with Speakon connectors for input and
stack output.
5