Using The Remote Control - Grohe 39354SH0 Guia De Inicio Rapido

Using the Remote Control

Water Pressure Adjust.
1
Adjusts the water pressure for rear washing, rear
washing-gentle, and front washing functions.
Flush (light)
2 *
Flush (full)
3 *
Toilet Seat Open/
4
Close
Stop
5
Stops the washing
and dryer functions.
Rear Washing
6
Provides a strong spray for rear
washing.
Rear Washing - Gentle
7
Provides a gentle spray for rear washing.
Front Washing (for women)
8
Provides front washing for women.
* These buttons operate only when the auto-flush function is equipped with GROHE tank.
Note
• "Power OFF screen" will be displayed when power is turned off by pressing the
the remote control.
• When there is no operation for 30 seconds, the screen returns to the home menu. In this case, start the
operation from the beginning.
Smartphone Operation
Initial setup of the "Sensia Arena" app
Before setup, switch ON Bluetooth of the smartphone.
Open the app and confirm the Disclaimer.
Push the [DRYER] and [WATER TEMP]
buttons simultaneously for more than
2 seconds.
Pair the toilet with smartphone
according to the "Pairing registration".
Precautions on Using Bluetooth
Keep the seat unit and remote control away from devices that emits radio waves.
Keep the seat unit and remote control away from the following devices as far as possible to prevent adverse effect caused by radio wave
interference.
• Microwaves / Wireless LAN devices / Bluetooth
• Near other devices that emit radio waves in the 2.4 GHz bandwidth (Digital cordless telephones, wireless audio devices, game consoles, PC
peripheral devices, etc.)
• If you are wearing an implantable cardioverter defibrillator (cardiac pacemaker), keep the remote controller away at least 22 cm from the
implant.
iOS
AGREE
00:00:00
SPRAY STRENGTH
DRYER WATER
TEMP TEMP
DRYER
00:00:02
®
compatible devices other than smartphones
®
Screen
9
The screen changes according to usage.
Function Buttons
12
Button operation changes according
to the display of the screen.
Nozzle Position Adjust.
13
Adjusts the nozzle position backwards or
forwards.
Pairing registration
Tap the app top page.
When the [Bluetooth pairing request]
message appears, confirm the device
[Shower Toilet] and tap [Pair].
Pair
The toilet unit indicates pairing is complete when you
hear a tone. Once you complete the pairing, there is
no need for a new Initial setup the next time.
Note
Be careful not to drop the smartphone in the toilet. We will
not take any responsibility for it.
Power / Home
10
Turns on/off, or goes to the
home menu.
Set / Next
11
Changes display of the
screen.
(power/home) button on
00:01:00
11
GB