Electronic Components; Battery Pack; Installing The Battery Pack; Removing The Battery Pack - BERG E-Frame BFR Manual De Usuario

4. Electric components

4.1 Battery pack

4.1.1 Installing the battery pack

• Place the key inside the lock
• Make sure the key is in unlocked position
• Carefully push the battery pack alongside the guide rail until the back side connects to the front side
without any gap.
• Turn the key in locked position.
• Remove the key, and keep it out of reach of children.
• Make sure that the cover of the charging plug is closed.
• Make sure the battery pack is locked by pulling it backwards.
• Make sure to keep your keys in a secure place.
• If the battery doesn't function check the contact surface between the battery pack and the docking
station, it must be free from dirt and moisture to make sure the e-gokart works correctly. Use a clean
cloth to clean it if required. Much moisture and dirt can lead to contact problems and/or faults. If it's
still not working contact your dealer.
A correctly installed battery pack can no longer be removed without a key.

4.1.2 Removing the battery pack

• Make sure that the cover of the charging plug is closed.
• Insert the key in the lock.
• Turn the key to unlocked position
• Remove the battery pack by firstly moving it towards the rear chainguard and secondly moving it
downwards.
Always remove the battery pack with 2 hands to prevent the battery pack from falling.
E-Frame BFR
L
L
H
15
H