Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Operation
1. Plug the unit into a correct mains socket. (Please refer to the rating label at
the rear of the unit for correct voltage/frequency.)
2. Press ON/OFF button to turn on the unit. The compressor will start to work.
3. Press
humidity setting button to set the working model you need:
continuous working, humidity 40%, 50%, 60% or 70%. The relative indicator
will light on.
4. Press
speed/ventilation button to set the ventilation speed, high or low.
The relative indicator will light on.
5. Press the TiMeR button to set the operating hour you need (1~24 hours). The
display window will show the hour(s) you set as you press the TiMeR button,
after releasing it for 8 seconds around, the display window will return to the
room humidity. as the set time has been reached, the compressor will stop
working automatically.
6. By pressing the "TeMP" button, the display window will show the room
temperature, after releasing the button for 8 seconds around, the display
window will return to the room humidity.
7.
DRYeR function is turbo ventilation to dry the moisture in the air
continuously, so it could help to dry the laundry.
8. For a better performance close windows and doors.
9. To turn off the unit, press ON/OFF button again.
10. Pre-setting function
other functions (including ON/OFF button), you can PRe-SeT the time for the
machine to work. For example, if you press the timer to '2', the unit will work
automatically after 2 hours.
11.Please note, the indicator in the front plate will light on in 3 different colors to
reflect the ambient humidity level.
immediately
condition is:
Blue light= room humidity > 70%
green light= room humidity > 50 ÷ 70%
Red light= room humidity < 50%
Red light flash= water full alarm
By pressing TiMeR button but without turning on the
what
the
ambient
By this, the user can understand
humidity
7 7
17
Publicidad
