Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
<Using the rubber pad (optional accessory) (Fig. 6)>
(1) Insert the washer nut (optional accessory) through
the rubber pad (optional accessory) and thread it
onto the spindle.
(2) Press the lock pin to secure the spindle and tighten
the washer nut with a wrench.
(3) Wrap the rubber pad with the hood of the wool
bonnet (optional accessory) and fi rmly secure it by
tying a string around it. Be sure the excess string
is fi rmly tucked inside the wool bonnet to prevent it
from fl ying out while polishing.
The unbalanced fitting of the wool bonnet may
cause vibration (Fig. 7).
(4) To remove the wool bonnet, follow the above-
mentioned procedure in reverse order.
●
For use as a Sander (Fig. 8)
(1) After placing the sanding disc (optional accessory)
on the rubber pad (optional accessory), thread the
washer nut (optional accessory) onto the spindle.
(2) Press the lock pin to secure the spindle and tighten
the washer nut with a wrench.
(3) To remove the sanding disc, follow the above-
mentioned procedure in reverse order.
CAUTION
●
Tighten the backing pad suffi ciently.
●
Use a wrench to tighten the washer nut
suffi ciently.
●
After releasing the lock pin, check to be sure
that it has returned to its normal position.
12
Washer Nut
Rubber Pad
Tuck the excess
string into
Washer
Nut
Rubber
Pad
Wool Bonnet
Spindle
Lock Pin
Fig. 6
Hood
Fig. 7
Sanding Disc
Spindle
Lock Pin
Fig. 8
Publicidad
Tabla de contenido
