INFOSEC UPS SYSTEM E3 LIVE RT 2200VA Guía De Usuario página 28

Batt mode
3.3 Audible alarms
Alarm
Alarm code A06
Alarm code A09
Alarm code A14
Alarm code A16
Alarm code A18
4 . T R O U B L E S H O O T I N G
If the UPS system does not operate correctly, please solve the problem by using the table below.
Problem
Abnormal
Mains normal but not
Works in AC mode
The UPS will not turn on
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
28
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 07 19 AA 36 205 10
Initial
2th
3th
Possible Causes
1. AC Input missing
2. Input Breaker is tripped
The on/off Button is
designed to prevent
damage by rapidly turning
it off and on.
The unit is not connected
to an AC outlet.
Condition
Battery capacity is low
Battery disconnected
Over load occurs.
EPO active
Over temperature
1. Check AC input connection.
2. Unplug the power cord of the
UPS then press the circuit breaker
knob.
Turn the UPS off. Wait 10
seconds
and then turn the UPS on.
The unit must be connected to a
220-240V 50/60Hz outlet.
Remedy