SPIDO PC 300 Manual De Utilización página 18

Pump does not prime ?
Have you checked...
 Connections airtightness?
 If pump positionning is in accordance with instructions (max 1m
above water level)?
 If the filter of the pump is not obstructed
 If the pump is full of water?
 If power supply is correct?
You might need to...
 Repair connections and/or change the suction hose.
 Place
(recommended heights of suction and discharge).
 Clean up the filter of the pump.
 Fill the pump with water.
Abnormal noise?
Have you checked...
 If the pump is correctly fixed on its support?
 If the pump did not suck up dirt?
 If system hoses diameter are sufficient (at least the diameter of
the pump connectors)?
You might need to...
 Tight pump fixations
 Clean up the pump filter
 Change the diameter of the hoses
the pump in accordance with its performances
7