Dsp Overview; Input Channels; Output Channels; Application Overview - Tascam AE-4D Manual Del Usuario

DSP overview

This unit has a built-in DSP.
All of the following settings can be made using the dedi-
cated remote control application (TASCAM DCP CONTROL).
See the back of this manual for DSP block diagrams.

Input channels

Input channel fader
Use to adjust the input channel signals.
Input mute
Mute the input channel signal.

Output channels

Output channel fader
Use to adjust the level sent to the output jack.
Output mute
Mute the output channel signal.
10
TASCAM AE-4D

Application overview

Using the TASCAM DCP CONNECT remote control applica-
tion, you can operate the unit from a distance.
For details about the application, please see its Owner's
Manual.
You can download the application Owner's Manual from
the TEAC Global Site (http://teac-global.com/).
INPUT screen

Notes about Dante

Dante is a transmission protocol developed by Audinate.
Using networks based on gigabit Ethernet standards, it en-
ables multichannel (512 IN/512 OUT) transmission and high
precision, for example.
Check the Audinate website for details about Dante.
https://www.audinate.com/