12
INSTALLATION
2
Slide the unit from the cabinet by gripping
the base pan handle and pulling forward
while bracing the cabinet.
CAUTION
● The unit is heavy. To prevent injury, use
proper lifting techniques when pulling unit
forward from cabinet. Obtain assistance
from another person if possible.
3
Cut the window sash seals (Foam-PE)
to the proper length. Peel off the backing
and attach the adhesive-backed foam to
the underside of the window sash and the
bottom of the window frame.
4
Insert the lower curtain panel guides into
the bottom of the cabinet. Insert the guides
cabinet.
5
Insert the top and bottom rails of the curtain
panels into the upper and lower panel
guides.
Upper Panel Guide
Left Curtain Panel
Lower Panel
Guide
Foam-PE
(Adhesive backed)
Right Curtain Panel
CAUTION
● The lower panel guides are easily broken.
Be careful with them when installing the
cabinet.
6
Fasten the curtain panels to the unit with 8
type A screws.
Cabinet Installation
Center Line
1 ¼" max.
1
Open the window. Mark a line on the center
of the inside sill.
Carefully place the cabinet in the window and
align the center hole on the cabinet bottom
front with the bracket using a carriage bolt
and a lock nut.
Center Hole
2
Pull the bottom window sash down behind
the upper guide until they meet.
Inside Sill
Outside Sill
Inside Sill
Window Sash
Upper Guide