for the hard pin brush. Insert the plug in the
socket when the desired brush is placed.
Divide the hair into narrow strands.
Take hold of a strand and pull it straight
out from the head. Place the styler brush
against the hair strand, close to the head
and on the side where you want that strand
to fall, and pull the brush through the hair.
This method will spread the hair evenly
across the brush. Pull the brush to the end
of the strand and catch the hair ends in
the brush. Now roll the brush up until you
reach the head (or stop earlier if you only
want to curl the ends). Switch on the device
and wait till the curl keeps it shape. Unroll
the curl until you can remove the round
brush from the curl. Allow the curl to cool
down before brushing it through. Proceed
in the same way, strand by strand. You can
also use the brush lock for rotating, use the
switch to rotate. After a little practice with
the styler you will soon learn how to achieve
the results you are looking for.
Switch:
0 = Device is off
= 150 W
= 300 W
> CLEANING AND MAINTRANCE
• Unplug the device before cleaning it.
• Do not let children clean the device.
• Never submerse it in water.
• Protect the device from dust.
• Occasionally clean the ventilation grill to
remove dust and hairs.
• You can use a slightly damp cloth to clean
the device. Afterwards, dry the device with
a dry cloth.
ENGLISH • 7