Using Your Remote; Controlling Combo Devices; Using Shift - GE 24944 Manual De Instrucciones

Using Your Remote

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/
VCR, etc.) will require you to set up two different Mode
buttons to control both parts of the Combo device.
For example, if you have a TV/DVD Combo, you might
need to set up one code under the TV button to
control the TV part AND a separate code (under any
other Mode button) to control the DVD part.
Using SHIFT for Menu and Navigation
The SHIFT button allows access to more than one
function for certain buttons.
Use the SHIFT/SETUP button prior to accessing
the MENU, OK, EXIT and Navigation functions,
for example:
For MENU, press and release
SHIFT/SETUP then INFO/MENU.
For OK, press and release
SHIFT/SETUP then MUTE/OK.
For EXIT, press and release
SHIFT/SETUP then LAST/EXIT.
For Up, Down, Left or Right Navigation,
press and release SHIFT/SETUP
followed by the respective Channel or
Volume button.
SPECIAL NOTE: Remote will stay in shift mode
until the SHIFT button is pressed again, or until 10
seconds of inactivity.
10