JVC KW-R925BTS Manual De Instrucciones página 29

DISPLAY SETTINGS
BRIGHTNESS Set the brightness for button and display illuminations for day and night
separately.
1 DAY / NIGHT: Select day or night.
2 Select a zone. ( 24)
3 Set the brightness level (00 to 31). (Default: DAY: 31 ; NIGHT: 15)
2
SCROLL * ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at
5-second intervals. ; OFF: Cancels.
COLOR
PRESET Select color for display and button illuminations separately.
Default color:
ALL ZONE: [COLOR 08], DISP ZONE: [COLOR 01],
ZONE 1: [COLOR 08], ZONE 2: [COLOR 46]
1 Select a zone. ( 24)
2 Select a color for the selected zone.
• COLOR 01 to COLOR 49
• USER: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
• COLOR FLOW01 to COLOR FLOW03: Color changes at different
speeds.
• GROOVE/ TECHNO/ EMOTION/ RELAX/ SPECTRUM/ SWEEP/
POP: The selected color pattern is shown.*
[ALL ZONE] is selected in step
* 1
The illumination control wire connection is required. ( 33)
* 2
Some characters or symbols will not be shown correctly (or will be blanked).
*
3
If one of these color pattern is selected, the [ZONE 1], [DISP ZONE], [ZONE 2] illumination
color will change to the default color.
3
(Selectable only when
1
.)
DAY COLOR Store your own day and night colors for different zone.
1 Select a zone. ( 24)
2 RED / GREEN / BLUE: Select a primary color.
3 00 to 31: Select the level.
Repeat steps 2 and 3 for all the primary colors.
NIGHT COLOR
• Your setting is stored to [USER] in [PRESET].
• If [00] is selected for all primary colors for [DISP ZONE], nothing
appears on the display.
COLOR GUIDE ON: Changes the button and display illuminations when settings are
performed on menu and list search. Display zone will automatically
change depending on volume level. ; OFF: Cancels.
[NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your car's
headlight.
25
ENGLISH