Technical Specifications - GOAL ZERO YETI 3000X Guia Del Usuario

Technical Specifications

Charge times
Maximum input (standard)
Wall charger (230W)
Goal Zero Boulder 200 Briefcase
Goal Zero Boulder (2X) 200 Briefcase
Goal Zero Boulder (4X) 200 Briefcase
Battery:
Cell Chemistry
Pack Capacity
Single Cell Equivalent Capacity
Lifecycles
Shelf-life
Management System
Ports:
USB-A Port (output)
USB-C Port (output)
USB-PD Port (output)
6mm Port (output, 6mm)
12V Car Port (output)
12V Power Pole port (output)
120V AC Inverter (output, pure sine wave)
230V AC Inverter (output, pure sine wave)
UNIVERSAL OR AUSTRALIA (TYPE 1) AC PLUGS
Charging Port (input, 8mm)
Power Pole Charging Port (input)
Expansion Module port
10
5 hrs
13 hrs
24-30 hrs
12-15 hrs
6-11 hrs
Li-ion NMC
3032Wh (10.8V, 280.8Ah)
842.4Ah @ 3.6V
500 Cycles to 80% capacity (Discharge rate: 1C, Full
charge/discharge, Temp: 25C)
Charge every 3-6 months
MPPT charge controller
5V, up to 2.4A (12W max), regulated
5 - 12V, up to 3.0A (18W max), regulated
5 - 20V, up to 3.0A (60W max), regulated
12V, up to 10A (120W max), regulated
12V, up to 13A (160W max), regulated
12V, up to 30A (360W max), regulated
120VAC 60Hz, 16.5A (2000W, 3500W surge)
230VAC 50Hz, 8.5A (2000W, 3500W surge)
14-50V, up to 10A (120W max)
14-50V, up to 50A (600W max)
Covered port under the lid. To be used with Goal Zero
expansion modules only.
WiFi
RF C
Prot
Freq
Blue
Prot
Gen
Weig
Weig
Dime
Dime
Ope
Cert
Warr