Mr. Heater MH25NG Instrucciones De Funcionamiento Y Manual Del Propietario página 3

CHAPTER 1
INTRODUCTION
1. EQUIPMENT
This heater is the consumer version of our highly
successful, thoroughly tested, gas fired, infrared,
industrial utility heater.
This heater does not require an external electrical
source for operation.
The major components of the heater and a typical
installation are identified in Figure 1. The basic heater
consists of the complete burner assembly, flue deflector,
grid, reflector assembly and face guard.
Mr. Heater Gas Fired Infrared Workshop Heater
2. PURPOSE OF EQUIPMENT
WARNING:
Figure 1. Heater Major Components
E3
This heater is for indoor installation only. Not for
use in residential dwellings. NOTE: A residential
dwelling is a domicile intended for use by one
or more persons and that includes one or more
areas, such as those used for cooking, eating,
living, sleeping, or a sanitary facility. A residential
dwelling does not include an attached and
detached garage, workshop, or outdoors.
Operating Instructions and Owner's Manual