SEVERIN KS 9798 Instrucciones De Uso página 12

GB
Cabinet freezer
Dear Customer,
Before using the appliance, please read the following
instructions carefully and keep this manual for future reference.
The appliance must only be used by persons familiar with these
instructions.
Transporting the appliance
∙ To prevent damage to the unit during transport, ensure that
all accessories and components inside and around the
appliance are securely fastened.
∙ The unit must only be transported in its vertical position; do
not tilt any more than 30°. For positioning, we recommend
that you tilt the unit slightly backwards. In this way, the
transport rollers can be used to move it to its intended place
of installation.
∙ Once the unit has been positioned, wait for about 30
minutes before it is connected to the mains.
∙ If the unit has been tilted more than 30° during transport,
allow it to stand in an upright position for at least 4 hours
before it is connected to the mains.
Connection to the mains supply
∙ The appliance should only be connected to an earthed
socket installed in accordance with the regulations. Make
sure that the supply voltage corresponds with the voltage
marked on the rating label.
∙ This product complies with all binding CE labelling
directives.
∙ Do not operate this unit by means of a transformer.
∙ To prevent noise vibration, ensure that the power cord does
not touch any part of the rear of the unit.
Intended use
∙ This compressor-freezer unit is designed
for deep-freezing and long-term storage
of deep-frozen food, as well as for
making ice-cubes.
∙ Using it in any way other than the above
is not advised.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
∙ This appliance is intended for domestic
or similar applications, such as
- in staff kitchens in shops, offi ces and
similar working environments,
- in agricultural working environments,
- by customers in hotels, motels etc. and
12
similar accommodation,
- in bed-and breakfast type
environments.
∙ This appliance is not intended for
commercial use, nor for use in the
catering business or similar wholesale
environments.
Important safety instructions
∙
of environmental compatibility, which is
nevertheless fl ammable. Ensure,
therefore, that none of the components of
the refrigerant circuit become damaged
during transportation and installation of
the appliance. If damage to the cooling
circuit does occur, do not switch on or
connect the appliance to the mains
power. In the case that there is an open
fi re or any other sources of ignition in the
vicinity of the refrigerant gas, make sure
it is removed immediately from this area
and that the room is then thoroughly
ventilated.
∙ Warning: Keep ventilation openings, in
the appliance enclosure or in the built-in
structure, clear of obstruction. Suffi cient
ventilation must be ensured at all times.
∙ Warning: Do not damage the cooling
circuit. Any escaping refrigerant causes
damage to the eyes; there is also a
danger of the gas igniting.
∙ Warning: Do n ot use any external
device (e.g.; heaters or heating fans) to
The cooling circuit in
this appliance
contains the
refrigerant isobutane
(R600a), a natural
gas with a high level