Teac UD-505 Manual Del Usuario página 25

Line output
Use to select the connectors that output analog audio.
o Output through both the RCA connectors and the XLR connec-
tors at the same time is not possible.
MENU
LINE OUT SELECT
RCA
RCA
Output through the RCA connectors.
XLR (HOT 2)
Output through the XLR connectors with 2: HOT polarity.
XLR (HOT 3)
Output through the XLR connectors with 3: HOT polarity.
Line output level
Use to select audio level output from the analog audio output (LINE
OUT) connectors.
MENU
LINE OUT LEVEL
FIXED 0dB
FIXED 0dB
A maximum of 2 Vrms is output. Select this if you want to adjust
the volume using an amplifier.
o No sound will be output if headphones are connected.
FIXED +6dB
A maximum of 4 Vrms is output. Select this if you want to adjust
the volume using an amplifier.
o No sound will be output if headphones are connected.
o If the sound distorts, set this to FIXED 0dB.
VARIABLE
This will enable adjustment of the analog output level using the
VOLUME knob. Select this if you want to adjust the volume using
this unit.
o No sound will be output if headphones are connected.
OFF
No sound is ever output.
Headphones settings (6.3 mm)
Make settings suitable for the headphones being connected
(page 12).
MENU
HEADPHONE 6.3mm
UNBALANCED
UNBALANCED
Unbalanced headphones
BALANCED
Balanced headphones
Balanced headphones are operated with differential drive.
The negative and positive connectors operate with opposite
polarities.
ACTIVE GROUND
Balanced headphones
The amp drives so that the negative connector of balanced head-
phones is 0 V.
To the headphones, the characteristics of the outputs become
equivalent.
Headphones settings (4.4 mm)
Make settings suitable for the headphones being connected
(page 12).
MENU
HEADPHONE 4.4mm
BALANCED
BALANCED
Balanced headphones
Balanced headphones are operated with differential drive.
The negative and positive connectors operate with opposite
polarities.
ACTIVE GROUND
Balanced headphones
The amp drives so that the negative connector of balanced head-
phones is 0 V.
To the headphones, the characteristics of the outputs become
equivalent.
EN
25