Ryobi RY141812G Manual Del Operador página 8

 Do not use acids, alkalines, solvents, flammable
material, bleaches, or industrial grade solutions in this
product. These products can cause physical injuries to
the operator and irreversible damage to the machine.
 WARNING: High pressure jets can be dangerous
if subject to misuse. The jet must not be directed at
persons, animals, electrical devices, or the machine itself.
 Keep the motor away from flammables and other
hazardous materials.
 Check bolts and nuts for looseness before each use. A
loose bolt or nut may cause serious motor problems.
 Before storing, allow the motor to cool.
 When servicing use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
 ONLY use cold water.
 Never pick up or carry the machine while the motor
is running.
 Never start the machine if ice has formed in any part of
the equipment.
SPECIFIC SAFETY RULES
4 — English
 Make sure minimum clearance of 3 feet is maintained
from combustible materials.
 Never spray close to the surface to be cleaned, as you
can damage the surface.
 After stopping the motor, always pull the trigger on the
trigger handle to relieve stored pressure in the high
pressure hose. Failure to do so could result in serious
personal injury.
 Ensure the high pressure hose is properly connected
before using the product.
 Connect pressure washer only to an individual branch
circuit.
 Hold the trigger handle securely with both hands.
Expect the trigger handle to move when the trigger is
pulled due to reaction forces. Failure to do so could cause
loss of control and injury to yourself and others.
 For outdoor use only.
 Save these instructions. Refer to them frequently and
use them to instruct other users. If you loan someone this
product, loan them these instructions also.