SNOWJOE 24V-X2-SB18-CT Manual De Instrucciones página 10

IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger.
Assembly
Assembling the handles
1. For easy assembly, the unit comes complete with
most parts already connected. To complete the handle
assembly, simply pull the middle frame back and pull the
upper frame up (Fig.4).
Fig. 4
Upper
frame
2. Secure the connection of the middle frame to the lower
frame by fastening the first set of knobs and bolts on each
side (Fig. 5).
Fig. 5
3. Secure the connection of the upper frame to the middle
frame by fastening the second set knobs and bolts on
each side (Fig. 6).
Fig. 6
Discharge Chute Assembly
1. Loosen the chute deflector knob to lift the chute deflector
(Fig. 7).
Fig. 7
Chute
deflector
Middle
frame
Lower
frame
2. Lift the chute deflector and lock it securely onto the
discharge chute (Fig. 8).
Fig. 8
Chute
deflector
Middle
frame
Knob + bolt
Lower frame
3. Raise or lower the chute deflector to the desired height of
the snow stream and tighten the chute deflector knob
(Fig. 8).
NOTE: Do not overtighten the chute deflector knob.
10
Middle frame
Chute deflector knob
Upper
frame
Knob +
T-bolt
Chute
deflector
knob