Descargar Imprimir esta página

ASROCK P4FSB1333-650 Manual De Usario página 9

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

2. 2. 2. 2. 2. Installation
Installation
Installation
Installation
Installation
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Take note of the following precautions before you install mother-
board components or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any
component. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
2. To avoid damaging the motherboard components due to static
electricity, NEVER place your motherboard directly on the carpet
or the like. Also remember to use a grounded wrist strap or touch
a safety grounded object before you handle components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded
antstatic pad or in the bag that comes with the component.
5. When placing screws into the screw holes to secure the
motherboard to the chassis, please do not over-tighten the
screws! Doing so may damage the motherboard.
2.1 CPU Installation
2.1 CPU Installation
2.1 CPU Installation
2.1 CPU Installation
2.1 CPU Installation
This motherboard is bundled with one
selected CPU operating at FSB1333 /
2.66GHz. Please do not remove ASRock CPU
stickers on both sides of CPU socket on this
motherboard. If the stickers are
damaged, removed or bear the word
"VOID", ASRock is not responsible for
the after service of this CPU.
In the future, you may adopt other
compatible Intel 775-LAND CPU on this
motherboard for upgrade purpose. For the
installation of Intel 775-LAND CPU, please
follow the steps below. ASRock reminds you
that as long as you adopt other CPU on this
motherboard, we will not be responsible for
the after service of the bundled CPU.
Before you insert the 775-LAND CPU into the socket, please check if
the CPU surface is unclean or if there is any bent pin on the socket.
Do not force to insert the CPU into the socket if above situation is
found. Otherwise, the CPU will be seriously damaged.
ASRock P4FSB1333-650 Motherboard
ASRock CPU Sticker
775-Pin Socket Overview
9 9 9 9 9

Publicidad

loading