Schneider Schirme Samos Instrucciones De Montaje página 42

EN
Assembly
Place the two elements of the cross base (A + B) one on top of the other as
shown and screw firmly to the rotating plate (D).
Use the screws M8x25 (F) and one washer (G) for each screw.
Then bolt the tube (C) to the rotating plate (D).
Use the screws M8x20 (E) and one washer (G) for each screw.
NOTE:
The tube slants backwards at an angle of 3°(the illustrations can vary).
This gives the umbrella a slight backward slant and therefore an
overall elegant appearance.
E
F
G
42
C
D
A
B