Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning with the self-cleaning recharger
Preparing the self-cleaning recharger
1
Remove the shaver and the appliance plug from the self-cleaning recharger.
2
1
1
1
Remove the water
tank and then open
the water tank cap.
2
2
Wash away the old
cleaning liquid and
then rinse the water
tank.
Replace the HydraClean™ Shaving System Solution Cartridge when
•
the status lamp is illuminated. Use the below chart as a guide.
Shaving
Cleaning
1 time/day
1 time/day
1 time/3 days
1 time/week
The expiration date of the cleaning liquid is 6 months after it is opened.
If you do not use the cleaning liquid for more than 6 months, throw
3
3
3
Pour tap water into
the water tank.
Do not let the water rise above
•
the maximum water line. This
may cause the cleaning liquid
to spill.
4
4
Securely close the
water tank cap and
then attach the tank.
Reusability
approx. 30 times
approx. 10 times
approx. 4 times
4
5
5
Peel off the seals
from the new
detergent cartridge.
(2 seals)
Hold the detergent cartridge
•
horizontally. (The detergent
may spill if the detergent
cartridge is tilted too much.)
away the detergent cartridge and the cleaning liquid.
Only use self-cleaning recharger detergent for Panasonic shavers.
•
Always change the detergent cartridge and the cleaning liquid in the
•
water tank at the same time. Adding water, or changing just the
detergent cartridge or the water, will result in deteriorated cleaning
functions.
If you operate the self-cleaning recharger, the concentrated detergent
•
in the detergent cartridge dilutes and the water inside the tank will
become a cleaning liquid.
6
6
Attach the detergent
cartridge.
7
Publicidad
Tabla de contenido
