Charging The Battery; Inserting The Battery And Memory Card - Canon PowerShot SX260 HS Guía De Inicio

Initial Preparations

Charging the Battery

Inserting the Battery and Memory Card

Terminals Battery Lock
Remove the cover and insert the
battery.
After aligning the o marks on the battery and

charger, insert the battery by pushing it in
( ) and down (
Charge the battery.

Once you connect the power cord to the
charger and plug the cord into a power outlet,
the lamp will light up orange.

When charging is finished, the lamp turns
green. Remove the battery.

For details on charging time and the number
of shots or recording time available with a
fully charged battery, refer to "Specifications"
in the Camera User Guide.
Open the cover.

Slide the cover (
Insert the battery.

While pressing the battery lock in the direction
of the arrow, insert the battery as shown and
push it in until it clicks into the locked position.

To remove the battery, press the battery lock
in the direction of the arrow.
).
) and open it ( ).
3