Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4.
Install wall plate assembly
against the wall plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
3
16
18
17
using two lag bolts
and two washers
3 in.
(75 mm)
7/32 in.
(5.5 mm)
16
.
19
. Tighten the lag bolts only until they are pulled firmly
4
17
18
19
9
Publicidad
