Watching Tv; Turning On/Off The Power; Initial Setup - Sharp LC-42SV49U Manual De Operación

Watching TV

Turning On/Off the Power

CH
+
VOL
-
POWER
MENU
INPUT
1
POWER
POWER

Initial Setup

When you turn on the TV for the first time,
the Initial Setup will guide you through
the setup process. Perform the following
steps before you press POWER on the
remote control unit.
1.
Insert the batteries into the remote
control unit. (See page 13.)
2. Connect the antenna cable to the TV.
(See page 12.)
3. Plug in the AC cord to the AC outlet.
(See page 10.)
T V US B
ENTER
E X T I
Press POWER on the TV, or POWER on the remote
control unit to turn the power on.
• POWER indicator : Power on,nothing;Power off,red.
Press POWER on the TV, or POWER on the remote
control unit again to turn the power off.
• The TV enters standby and the image on the screen
disappears.
INPUT
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
2 3
• Small amount of electric power is still consumed even when
the TV is turned off.
• there is no signal input for 5 minutes, the power will turn to
standby mode automatically.
P C ME NU
R E T U R N
If
1. Initial Setup
• The Initial Setup screen display at
the first use. Press ENTER to start
the initial setup.
Initial Setup
Thank you for your purchase of our
SHARP Liquid Crystal Television.
Please press [ENTER] to start the
wizard.
2. Language setting
• Select the OSD menu language
from English, Spanish, or French.
• Press
▲ / ▼
language listed on the screen, and
then press the
next step.
Initial Setup
Please select your Language:
< Back
Welcome
to select the desired
button to the
►
Language
English
Españpl
Français
Select >Next Return Exit
23