Installation Instructions; Freestanding Outdoor Grill Installation - Kitchen Aid 720-0819 Manual De Uso

Hardware contents pre-installed as noted in instructions
that follow.
REF#
1. 1/4*15mm Truss Head Screw
2 1/4*15mm Spring Washer
3 5/32*12mm Countersunk Head
4 1/4*10mm Stage Screw
Preparation
Before beginning assembly, make sure all parts are present.
Compare parts with package contents list and diagram above. If
any part is missing or damaged, do not attempt to assemble the
product. Contact customer service for replacements parts.

Estimated Assembly Time: 20 minutes

Note: The right and left sides of the grill are designated as if
you are facing the front of the grill.
12

INSTALLATION INSTRUCTIONS

Freestanding Outdoor Grill Installations
Description
screw
Swivel Caster Assembly
1. Unpack bottom panel and 2 casters. Note that there are 2
casters pre-assembled to the bottom panel. Check and make
sure the 2 pre-assembled casters have not loosened during
transit. Remove 8 pre-assembled screws from the bottom panel
and use those screws to secure the 2 casters. The locking
caster is to be located at the rear of the bottom panel.
QTY
14pcs
4pcs
4pcs
4pcs
Cart Assembly
1. Unpack both side panels and the rear panels. Loosen the 8
screws which are pre-assembled to the bottom panel and the 6
pre-assembled screws on the side panels.
2. Secure the left side panel by clipping the open hole onto the
screws which is pre-assembled to the bottom panel and tighten
the 3 screws.