Frequently Asked Questions; Technical Specifications - Philips SCD464 Instrucciones De Manejo

Frequently asked questions

EN
Question
Parent unit reacts too
slow/late on baby's cry.
Parent unit reacts too quick
on other ambient sounds.
The link is lost every now and
then, sound interruptions etc.

Technical specifications

Power supply
Operating range
Operating temperature
Transmission frequencies
14
Answer
Set microphone sensitivity on the baby unit to a higher level
and/or move the baby unit closer to the baby
(keep minimal distance of 1 meter / 3 feet).
Set microphone sensitivity on the baby unit to a lower level
and/or move the baby unit closer to the baby
(keep minimal distance of 1 meter / 3 feet).
You are probably approaching the outer boundaries of the
practical range.Try a different location or reduce the distance
slightly. Please note that it takes about 30 seconds each time
before a new link is established.
– AC power adapter 230V AC, 50 Hz (two included).
Output voltage 9V DC, 200mAh.
– Up to 200 meters / 600 feet in open air.
Depending on the surroundings and other disturbing factors
this range may be limited.
Dry materials
Wood, plaster, plaster
cardboard, glass (without
metal or wires, no lead)
Brick, plywood
Reinforced concrete
Metal grids, bars
Metal, aluminium sheets
For wet and moist materials reduction can be as up to 100%.
0 °C - 40 °C
40.665 MHz, 40.680 MHz, 40.695 MHz
Material Loss of
thickness range
< 30cm / 12˝ 0-10%
< 30cm / 12˝ 5-35%
< 30cm / 12˝ 30-100%
< 1cm / 0.4˝ 90-100%
< 1cm / 0.4˝ 100%