IFM CR7132 Manual De Instrucciones página 3

Functions and features
The programmable controllers of the series "SafetyController" are designed for use in
safety-related applications. They are suitable for direct installation in vehicles and mobile
machines using the on-board system (12/24 V DC battery operation).
Special hardware and software functions are integrated into the controllers for safety-related
applications, as described in these instructions. This enables the use as a safety controller.
WARNING
The "SafetyController" devices are approved for safety-related tasks in the field of operator
protection, if the corresponding system check routines are integrated in the operating
system and the application software and have been checked by a complete function test.
However, the final classification and approval of a system (hardware and software) may
only be carried out by the corresponding supervisory organisations.
Programming and important additions to these instructions
In addition to the programming system CODESYS and the software tool "Downloader", the
following documents are required for programming and commissioning of the controller:
● "Important notes on CR7n32" for the software versions used by you
● System manual "SafetyController"
● Programming manual "CODESYS"
If you do not have these documents, you can request them in German or English free of
charge on the indicated website or via e-mail, fax, phone or post at the address stated
below.
Internet www.ifm.com/uk
Data sheet search → Order no. → More information
Address ifm electronic ltd. efector House • Kingsway Business Park • Oldfield Road
Hampton • Middlesex TW12 2HD
E-mail enquiry_gb@ifm.com
Fax 020 8213-0001
Telephone 020 8213-0000
Set-up
Only qualified staff is allowed to set up the device.
Furthermore we expressly point out that any liability is excluded if the notes in the
programming and set-up documents are not adhered to.
SafetyController CR7xxx
III
UK