Usage Interruptions; Malfunctioning - Sagi KP12Q Manual De Uso

- Lubricate pins and bushes present on the mechanisms with suitable products. Carefully open and close the
doors several times so that the lubricant wets all the moving parts in contact.
- Make sure that the mechanism functions properly.
- Refit the two guards, securing them in position with corresponding screws.
The cleaning and mantainance operations have now come to end.
In case of longer inactivity of the refrigerator and for maintaining it in the best state act as following:
- set the general cut-out in OFF position.
- remove the plug from the socket.
- empty the refrigerator and clean it as described In the chapter "CLEANING".
- let the door open to avold the forming of bad smell.
Malfunctioning during operation is often due to banal causes , whitch may nearly all be resolved without the
help of a specialised technician. Consequently, before getting in touch with a service centre, check the
following:
PROBLEM
The appliance does not start
The internal temperature is too high
The appliance is excessively noisy
Some condensation
appliance
Upon completion of the above checks, if the fault persists, contact an authorised service centre. Always
indicate:

the nature of the fault

the model and the serial number of the unit can be found on the electrical specifications plaque, located
on the unit's instrument panel.
is produced on the

USAGE INTERRUPTIONS

POSSIBLE CAUSES
Check that the plug is properly inserted into the socket.
Check that there is voltage at the socket
Check the electronic card adjustment
Check for a heat source in the vicinity
Check that the door closes properly
Check that the appliance is standing level. A lopsided
appliance could set off vibrations
Check that the appliance is not touching other appliances
or parts which could resonate
Room humidity is very high
The door is not closed properly
20

MALFUNCTIONING