The appliance can be controlled using a remote control powered by a
1.5 V carbon-zinc alkaline batteries of the standard LR03-AAA type
(not included).
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper manner.
Button
Function
Turns the Motor On/Off.
Decreases the speed of the Motor.
Increases the speed of the Motor.
INTENSIVE
-
Activates Intensive speed from any other speed.
To disable it, simply press the same button again or turn the motor off.
-
Intensive speed is timed to run for 10 minutes. At the end of the 10 minutes the system
automatically returns to the speed set previously.
Press briefly for the Delay Function:
Can only be activated if the Intensive or 24h function is not active.
Activates and deactivates total shutdown of the hood (motor+lights) after 30 minutes:
To disable the Delay, simply press the button again or turn the motor off.
Press and hold for 2sec for the 24H Function:
Can only be activated if the Intensive or Delay function is not active.
Activates and deactivates the 24H function for 10 minutes every hour, for 24 hours. After this time it
is deactivated.
Turns the Hood lights On/Off at maximum intensity.
Press and hold for 2sec to turn the Hood lights On/Off at reduced intensity.
EN
REMOTE CONTROL
Control panel
Display
-
-
-
-
The led on the motor button
(on the hood controls) will
flash once every 0.5 seconds.
The led on the motor button
(on the hood controls) will
flash once every 2 seconds.
-
-
1 15