HyLoft 00651 Manual De Instrucciones página 3

Installation time: Approximately 30 minutes or less.
Important: Read through entire instructions before beginning any installations.
1. Install Shelf Brackets into Wall Studs
Page 3
1A:
Using Stud Finder, locate
studs 24" - 32" apart
1B:
Mark hole location with
pencil, and pre-drill with
3/16" drill bit.
Note: Make sure hole locations
are level before drilling any holes.
1C:
Note: Make sure brackets are level
Rub bar soap or add
a drop of liquid soap
to the threads of the
Lag Screws (C) to
ease installation.
Install brackets (B) with
(3) Lag Screws (C) using
1/2" nut driver or
socket wrench.