Appropriate Cookware; Function Selection; Timer Setting; Lock Function - Kasanova GET000001NOC Manual De Instrucciones

INDUCTION COOKTOP

APPROPRIATE COOKWARE

Cookware material requirement: Ferromagnetic or iron bottom.
Cookware size requirements: Flat bottom with diameter from 12cm to 26cm.
OPERATING INSTRUCTIONS
On/Off
After inserting the plug into the socket, a "Beep" will emit and the indicator above the [On/Off] key
will start to flash, indicating the appliance in connection with a power source, known as standby
mode. The display shows [- - - -] when [On/Off] key is pressed once, the appliance goes to se-
lection mode and the indicator above [On/Off] remains light up. Press the corresponding function
keys to start operation. Stop the operation and switch to standby mode by pressing [On/Off] key
after cooking. If there is no operation within 60 seconds, then the cooker will shut down.

Function Selection

•
Power: Press [Function] key and the indicator of Power lights up, display will show [1600]
representing that the default power is 1600W. It can be adjusted by pressing + or - key to
set the desired power level, total 8 adjustable levels (500W/800W/1000W/1200W/1400W/1
600W/1800W/2000W). To cancel this mode, press [Function] key or [On/Off] key to stop the
operation.
•
Temperature: Press [Function] key and the indicator of Temperature lights up, display will
show [1500] representing that the default power is 150°C. It can be adjusted by pressing +
or - key to set the desired temperature level, total 8 adjustable levels (60°C/ 90°C/ 120°C/
150°C/ 180°C/ 200°C/ 220°C/ 240°C). To cancel this mode, press [Function] key or [On/Off]
key to stop the operation.

Timer Setting

Press [Function] key and the indicator of Timer lights up, display will show [00:30]. User can press
+ or - key to set for the desired time, press and hold for 3 seconds to access quick adjustment.
Time can be adjusted from 0 minute to 2 hour and 59 minutes. After setting, user can wait until
the display stop flashing. After the "Beep" signal, the appliance will stop the operation and change
to standby mode automatically when the end of the countdown. To cancel this function, user can
either press the [On/Off] key to return to standby mode or hold the [Timer] key to resume the
desired power or temperature operation.

Lock Function

To activate the child lock, user can press the [Lock] icon. All buttons except the [Lock] and [On/Off]
keys are locked. Hold for 3 seconds to unlock.
instruction manual
7