Print-Quantity Select; Canceling Print-Quantity Select - Kodak ADVANTIX C800 Manual Del Usario

PRINT-QUANTITY SELECT

This feature lets you choose before you
take the picture the number of prints
from 0 to 9 you will receive from the
photofinishing lab. This service is
dependent on the photofinishers
capability.
1. Open the
CONTROL
located below the
2. Press the
PRINT
(42) once with the control-
BUTTON
button actuator on camera strap.
• The LCD panel displays
" PRINT QUANTITY " and " P1 ."
3. Press repeatedly the print-quantity
button to select the number of prints
you want.
TITLE PRINT DATE
• You can view the numbers " P1 ,"
" P2 ," etc., in the
area on the LCD panel.
28
-
PANEL COVER
(15).
LCD PANEL
-
QUANTITY
SELECT ENTER
FRAME COUNTER
4. Press the
complete your selection.
• After you take the picture, the print
quantity defaults to 1.

Canceling print-quantity select

You can cancel the selected print
quantity after you take the picture and
(18)
before you take the next picture.
1. Press and hold the
BUTTON
2. Release the button when the motor
stops running.
• The film will rewind one frame to
rewrite the data.
3. See PRINT-QUANTITY SELECT,
steps 2 through 4, to select a different
quantity or bypass steps 2 through 4
if the default is to resume at P1.
(24)
(39) to
ENTER BUTTON
-
PRINT
(42).
QUANTITY