Operating Manual
EASYHUB Corded
MultiMedia Keyboard
JK-0100
1
Connecting keyboard to the PC
The keyboard has two USB plugs. One plug is for the
keyboard:
One plug is for the USB port on the left-hand side of
the keyboard:
Connect the plugs to two USB ports on the PC/
notebook.
2
KeyM@n software
The 11 Hotkeys of the keyboard are freely
programmable with the KeyM@n software. Try it and
see!
You can download the current version from
www.cherry.de/english/service/download.php
3
Keyboard does not work
•
Use another USB port on the PC/laptop.
•
To make sure that the keyboard is not defective,
test it if possible with another PC/laptop.
•
Set the option "USB Keyboard Support" or "USB
Legacy Mode" to enabled in the BIOS of the PC.
4
Tips
4.1 What if there is only one free USB port?
You can still use the keyboard if you only connect the
plug with the keyboard symbol. However, the USB
port on the left-hand side of the keyboard will not
work.
6
4.2 Cleaning
Caution!
Damage may be caused by harsh cleaning agents or
liquids in the keyboard
1 Do not use solutions such as gasoline or alcohol
and scouring agents or scouring sponges for
cleaning.
2 Prevent fluids from entering the devices.
3 Do not remove the keycaps of the keyboard.
1 Switch off the PC.
2 Clean the keyboard with a slightly damp cloth and
some mild cleaning agent
(e.g.: dishwashing liquid).
3 Dry off the devices with a soft, lint-free cloth.
4.3 RSI syndrome
RSI syndrome
RSI stands for "Repetitive Strain Injury". RSI arises
due to small movements continuously repeated over a
long period of time.
Typical symptoms are discomfort in the fingers or
neck. For further information see: www.cherry.de/
english/service/servicedownload_rsi.htm
1 Set up your workspace ergonomically.
2 Change the angle of the keyboard using the rear
supports.
3 Position the keyboard and mouse in such a man-
ner that your upper arms and wrists are out-
stretched and to the sides of your body.
4 Take several short breaks, with stretching exer-
cises if necessary.
5 Change your posture often.
4.4 Disposal
Dispose of the old unit via a collecting
point for electronic scrap or via your
dealer.