Functions And Features - Hitachi CX53E Guía De Uso

KEY TO ILLUSTRATIONS
SET
1. Handle
2. FM Telescopic Antenna
3. CD Door
4. BAND Switch
5. TUNING Wheel Knob
CASSETTE DECK
RECORD Button ( a )
6.
7. PLAY Button ( ; )
8. REWIND Button ( ) )
9. F. FWD Button ( ( )
10. STOP/EJECT Button ( Lc )
11. PAUSE Button ( J )
12. VOLUME Control
13. BASS BOOST Button
14. PHONES Socket

FUNCTIONS AND FEATURES

SOUND CONTROL SECTION
• Set BASS BOOST button [13] to R ON to get the rich bass sound. To turn it N OFF,
press BASS BOOST button again.
• Press SURROUND button [23] to emphasize the surround sound effect and the
surround indicator will light up. To turn off the effect, press SURROUND button again.
RADIO SECTION
RADIO AERIALS
• For FM, lengthen the telescopic aerial. To improve FM-reception, incline and turn the
aerial. Reduce its length if the FM-signal is too strong (very close to a transmitter).
• For AM, the set is provided with a built-in aerial, so the telescopic aerial is not
needed. Direct the aerial by turning the whole set.
STEREO/MONO (FM only)
• When an FM stereo signal is too weak or noisy for stereo listening, set the switch [4]
to the FM position to reduce the noise.
BEAT CUT (AM only)
• If beat noise is audible during the recording from an AM radio programme, flip switch
[26] over from [A] to [B] or from [B] to [A] to reduce the noise.
TUNER with 20 PRESET STATIONS
• Allows you to memorize 10 stations for FM and 10 stations each for AM.
006-010 CX-53E
All manuals and user guides at all-guides.com
15. FUNCTION Switch
CD CONTROL
16. STOP Button ( L )
17. PLAY/PAUSE Button ( -/J )
18. SKIP f Button ( f )
19. SKIP g Button ( g )
20. Cassette Door
21. PROGRAM Button
22. REPEAT Button
23. SURROUND Button
24. SURROUND Indicator
25. FM STEREO Indicator
26. BEAT CUT Switch
27. AC Mains
28. Battery Door
7
7
English
(See page 5)
7/29/02, 2:18 PM