Setting The Original Mode; Tbf-300/Tbf-310 / Tbf-410; Setting The Number Of Print Outs And Printing Language - Tanita TBF-300 WA Manual De Instrucciones

C. Setting the Original Mode
This process is used to deactivate the Goal Setter function (Target BF% section of printout) and the Wrestler Mode (Section
: Minimum Wrestling Weight of the printout). (See P.20. for sample printout.)
< H I N T ! >
If Goal Setter Mode or Wrestler Mode is on when using ""B.Wrestler Mode Print-Out"", there is no need to change this
setting. (It will automatically come on.)
<When GS Mode is selected>
<When Wrestler Mode is selected>
•The unit will start up with this setting the next time it is used.
•In standard use, if the Target BF% is not input, please select [gs 0.off].
This is the end of the section pertaining to the TBF-300 WA settings.
Please proceed to P.28 "9. Operating Instructions".
24
1. Turn on the power while pressing the [CLOTHES] key.
[0] : Mode is deactivated
[1] : Mode is activated
If "0" has been selected for the number of print
outs in P.19 "A. Setting the Number of Print
Outs and Printing Language", it will not be pos-
sible to preset this item.
2. When input has been completed, the unit will automatical-
ly switch to the measurement screen.
a TBF-300 / TBF-310 / TBF-410
For the TBF-310 / TBF-410
A. Setting the Number of Print Outs and Printing Language; and
B. Setting the Original Mode
A. Setting the Number of Print Outs and Printing Language
Select the number of print outs (0 ~ 9) and the printing language (English, French, German, Italian, Spanish, and Dutch).
The unit will start up with this setting the next time it is used.
1. Press and hold the [0] key, and press the [ON/OFF] key
once. Release the [0] key after "Prt-1" is displayed on the
screen.
2. Select the desired number of print outs.
Using the number keys, enter the quantity of print outs
desired. As many as nine are possible.
[1] ~ [9] : Quantity of print outs
[0] : No print out
3. Language Selection
If "0" has been selected for the number of print
outs in Step 2 above, it will not be possible to
preset this item.
The LCD will automatically advance to the Language
Selection Screen. The current language selection will be
displayed as a numerical value.
Example: (LNG-1) denotes English as the selected lan-
guage.
Select a preferred language by pressing the corresponding
number on the key pad.
[1] : English [2] : French
[3] : German [4] : Italian
[5] : Spanish [6] : Dutch
4. When input has been completed, the unit will automatical-
ly switch to the measurement screen.
If further change to the functions is desired, please turn off
the unit, and refer to steps 1 to 4 above.
25