Assembly Instructions/
Instrucciones de montaje
B650
WEIGHT CAPACITY: 350 lbs
CAPACIDAD DE PESO: 350 libras
1
1
Correct placement of U Bars
1
Place seat face-down on a table or counter with the
FRONT edge closest to you (BACK edge has the
shower sprayer notches, FRONT edge does not). Place U
bar labeled "1" in the groove in the seat which extends from
BACK LEFT corner of seat to RIGHT FRONT corner of seat,
as shown in Figure 1., above. Place the U bar labeled "2" in
the other groove, on top of U bar "1." NOTE: when placed
correctly, the 2 U bars will align at the center as shown in
Figure 2., above.
WARNING: Failure to assemble this bath seat correctly can
result in falls/injuries.
Coloque el asiento boca abajo sobre una mesa o mostrador
con el borde del asiento cerca del borde de la mesa. Coloque
la barra en U etiquetada "1" en la ranura del asiento, de
modo que el "1" en la barra esté al lado del "1" en el asiento.
Coloque la barra en U etiquetada "2" en el asiento para que
el "2" en la barra esté al lado del "2" en el asiento.
Manufactured for: Compass Health Brands Corp.
Middleburg Heights, OH 44130
www.compasshealthbrands.com • 800.376.7263
2
2
Figure 1.
Seat
Asiento x 1
U Bars
Barras U x 2
Labeled "1"
and "2"
Figure 2.
Proper alignment of U bars
2
Place screws with washers into the holes through
both U bars and into the screw holes in the seat.
Contour of the washers should match the curve of the bar.
Tighten the screws. Periodically check to assure that all
screws remain tight.
en el asiento. El contorno de las arandelas debe coincidir
con la curva de la barra. Apretar los tornillos. Controle
periódicamente para asegurarse de que todos los tornillos
estén apretados.
1
Bath and Shower Seat/
Asiento de baño y ducha
Leg Extensions
/
Extensiones de Pierna x 4
Washers/Arandelas x 5
/
Screws/Tornillos x 5
x 4
2
1
2
1
1
1
Figure 3.
Securing U bars to seat
/
Made in China
42-B65000_01 ©2018