Samsung WF409 Serie Manual Del Usuario página 19

Digital graphic
2
display
Wash Option
3
selection
buttons
Temperature
4
selection button
Spin selection
5
button
Soil Level
6
selection button
WF409ANW-02657D-02_EN.indd 19
•
It is recommended using a neutral detergent to prevent damage to the
cloth and to improve the washing results.
The Wool cycle of this machine has been approved
by Woolmark for the washing of machine washable
Woolmark products provided that the products are
washed according to the instructions on the garment
label and those issued by the manufacturer of this
washer, M0904.
Quick Wash - For lightly soiled garments needed quickly.
Rinse + Spin - Use for loads that need rinsing only or to add rinse-added
fabric softener to a load.
Spin Only - Provides a spin to remove more water.
Displays the remaining cycle time, all cycle information, and error messages.
Press these buttons to select different cycle options.
Pre Wash - To use this feature add detergent to the pre wash section of the
detergent compartment. When turned on, the washer fills with cold water and
detergent, tumbles, then drains and advances to the selected wash cycle.
Some cycles cannot be selected with with this option (See page 32~33).
You cannot select the prewash option in the Delicate, Wool, Quick
Wash, Hand Wash, Rinse+Spin, and Spin Only cycles.
Extra Rinse - Add an additional rinse at the end of the cycle to more
thoroughly remove laundry additives and perfumes.
Extended Spin - Add additional time to remove more water from loads.
Delay Start - Any cycle can be delayed for 1 to 24 hours in one-hour
increments. Displayed hour indicates the time at which the wash will be started.
My Cycle - Choose your favorite cycle including temperature, spin, soil level, option, etc.
Steam - Press this button to use the Steam Wash function. Steam Wash is available
with Heavy Duty, Normal, Perm Press, Sanitize, Bedding cycles. For heavily
soiled, colorfast garments, Steam Wash improves stain treatment and use
less water of each cycle (See page 33).
Press the button repeatedly to cycle through the different water temperature options.
Extra Hot/Cold - Heavily soiled, colorfast items. Only available with the Sanitize cycle.
Hot/Cold - Whites and heavily soiled, colorfast items.
Warm/Warm - Colorfast items. When warm rinse is selected, only the final rinse will
be warm.
The other rinses will be cold to conserve energy.
Warm/Cold - Moderately soiled, colorfast items; most wrinkle-free items.
Cold/Cold - Brightly colored, very lightly soiled items.
Press the button repeatedly to cycle through the different spin speed options.
Extra High - Removes more water from loads during spin.
To minimize wrinkling of wrinkle-free and no-iron fabrics, DO NOT use
the Extra High spin option for these loads, nor overload your washer.
High - Use for underwear, t-shirts, jeans and sturdy cottons.
Medium - Use for jeans, wrinkle-free or wash-and-wear items and synthetics.
Low - Use for delicate items needing a slow spin speed.
No Spin - Drains your washer without spinning. Use for extremely delicate
items that cannot tolerate any spin.
Press the button to select the soil level/washing time.
(Heavy    Normal    Light)
Heavy - For heavily soiled loads.

Normal - For moderately soiled loads. This setting is best for most loads.

Light - For lightly soiled loads.
washing a load of laundry _19
2009-12-04 ¿ÀÀü 11:19:42