Using the lens
■
Mounting the lens on the camera
En
Turn the camera off.
Remove the rear lens cap. (Fig. D)
Align the mounting index 6 on the lens
with the mounting index on the camera,
and rotate the lens counterclockwise until
it clicks into place. Be sure that the lens is in
the correct position when the mounting
index 6 is on the top of the lens.
Remove the front lens cap. (Fig. C)
Removing the lens from the camera
Turn the camera off.
Press and hold the lens release button on
the camera while turning the lens
clockwise.
Gr
Using the lens hood
■
Attaching the hood
Align the lens hood attachment index (
either of two indexes) 3 on the hood with the
lens hood mounting index 4 on the lens, and
14
turn the hood counterclockwise (as viewed
when holding the camera with the lens facing
away from you) until it clicks into place (Fig. B).
• Be sure that the lens hood mounting index is
aligned with the lens hood setting index
) 2.
(
• If the lens hood is not correctly attached,
vignetting may occur.
• To facilitate attachment or removal of the
hood, hold it by the base (near the lens hood
attachment index) rather than its outer edge.
• To store the lens hood, attach it in the reverse
position.
Detaching the hood
Hold the lens hood by the base (near the lens
hood attachment index) and turn clockwise, as
viewed when holding the camera with the
lens facing away from you, to detach.
,