Midwest Pet Gate 2929SG-WD Instrucciones De Montaje página 6

Auxiliary Lock
Determine which direction you want the gate to
swing open. Rotate either side of the auxiliary
lock down to prevent the gate from opening in
the opposite direction, or leave them both up to
open the gate in both directions.
Instructions for Adding 3" Gate Extension
1. Begin by determining which extension or
combination of extensions is required for your
doorway opening. Attach the top plastic
connector and bottom plastic connector to the
top and bottom of the extension rod. NOTE:
The insertion point of the Top Connector is ¾"
wide, and the insertion point of the Bottom
Connector is 5/8" wide.
2. Using a flat head screwdriver, remove the top
plastic insert and the bottom plastic insert from
the gate frame as shown.
3. Connect the extension rod to the gate frame
as shown.
4. Install the top plastic insert and bottom plastic
insert that were removed in Step 2 into the
ends of the extension bar's top and bottom
plastic connector.
5. Once the required extensions are attached to
the gate, insert the threaded spindle bolts
into the ends of the extensions you just
assembled and follow the instructions from the
pet gate starting from Step 1.
Insertion Part
3/4" wide
Insertion Part
5/8" wide
6