Ground Rules; Connection Diagram - Numark C1 Manual De Inicio Rápido

BOX CONTENTS
C1
IEC Power Cable
Quickstart Guide
Safety Instructions & Warranty Information
REGISTRATION
Please go to http://www.numark.com to register your C1. Registering your product ensures that we can keep you up-to-date
with any last-minute product developments and provide you with world-class technical support, should you run into any
problems.

GROUND RULES

1. Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to "zero."
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order:
•
Audio input sources (i.e. turntables, CD players, etc.)
•
Mixer
•
Last, any amplifiers or output devices
10. When turning off, always reverse this operation by turning off:
•
Amplifiers
•
Mixer
•
Last, any input devices

CONNECTION DIAGRAM

CD BURNER
HOUSE AMP
HEADPHONES
TURNTABLE
CD PLAYER CD PLAYER
1
TURNTABLE
REMOTE MIXER
CD PLAYER NORMAL FLANGER L R AUTOCUT RATE LOPASS
RATE
FILTERS AUTOPAN FILTERED VARI-CUT
MICROPHONE