On/Off Switch - Vitamix Venturist Serie Manual Del Usuario

Technology - The blender, containers and cups communicate through wireless technology.
Each container is programmed to run on the blender base for optimum performance according to
it's size and functionality.
Legacy Vitamix Containers - Legacy Vitamix containers will not work with your Venturist blender
base. Legacy machines are Vitamix C Series, G Series and S Series. For more information about
Vitamix products, please go to vitamix.com.
On /Off (I/O) Switch - The On/Off switch (I/O) is located on the right side of the blender base.
The On/Off switch controls power to the machine.
Sleep Mode - The blender will enter sleep mode if the control panel is not used after
30 seconds. The screen will dim. To exit sleep mode, rotate the variable speed dial to the desired
speed or program for your next blend.
Container Detect - Three dashes (- - -) will display on the control panel if a container is not on the
blender base. Once a container is placed, 0:00 will show on the display.
Start/Stop ( I ) - Stop the blender at any time by pressing Start/Stop ( I ) .
Variable Speed Dial - The Variable Speed Dial gives you manual control from Variable 1 (slowest)
to 10 (highest).
Pulse ( ) - The blades will rotate at the speed displayed on the control panel when pressed.
Display - The timer will count up when using variable speed until Start/Stop is pressed.
Each container is programmed with a specific maximum run time. The blender will shut down
automatically when the maximum run time has elapsed.
Model 350 Programs - The icons are listed in Vitamix recipes. The blender will stop at the end of
the program automatically. Programs can be stopped by pressing Start/Stop at any time. Program
times are not adjustable with the timer function. When Start/Stop is pressed mid-program; the
machine will stop and the program time will reset on the display to the beginning of the run time. If
the dial is moved to Standby ( ), 0:00 will be visible on the display.
Smoothies Frozen Desserts
Error Codes - If you see an error code on the display make note of the numbers on the display after
the error code. Call Vitamix Customer Service for help with the issue.. Recording the numbers isn't
necessary, but will give the Customer Service team more information to help with the issue.
Motor - The motor is designed to protect itself from overheating. If the blender will not start
immediately check to make sure you have plugged the unit in and the On/Off switch is On. If the
motor has overheated, allow the motor to cool for 20-45 minutes.
Tips to prevent 'overloading' your blender:
Process only Vitamix recipes when learning to use the blender. Do not process recipes at lower
speeds than recommended. Do not process recipes at higher speeds than recommended.
Do not process recipes for longer than recommended. Use your tamper to process thicker mixtures
and keep ingredients moving around and through the blades.
Tamper - Lids and tampers are not interchangeable between different container styles, types and
sizes. Use the tamper that was supplied with your blender.
The container should not be more than two-thirds full when the tamper is used.
To avoid overheating, DO NOT use the tamper for more than 30 consecutive seconds.
p
a r t S a n d
Soups Self-Cleaning
f
e at u r e S
Blender with Variable Speed
Pulse
Blender with Variable Speed and Programs
Pulse

On/Off Switch

Timer
Start/
Stop
Variable
Speed Dial
Timer
Start/
Stop
Variable Speed
Dial with
Programs
3