Parts; Start Up - Truper ENNE-120 Manual Del Usuario

Parts

Start Up

Air Supply Connection
• Before connecting to the tool, connect the hose to the
compressor and let some air run through the hose and
coupling, to verify both are clean.
• If a filter-oil feeder similar to the one recommended in
page 3 is not available apply a few drops of oil suitable for
tools into the air inlet (A).
• Connect the air hose to the tool with an empty cartridge
using a fast coupling (B).
connecting the hose to the tool double check the staple
cartridge is empty.
• The fast coupling is very useful to quickly connect and
disconnect the tool and interchange them easily.
Cartridge Loading
• Disconnect the air hose from the tool.
• Open the stapler's cartridge pressing the cartridge
lock (C) and pulling backwards the cartridge cap (D).
• Place the staples onto the open cartridge rib and
push them forward as indicated in the illustration.
• Set the staples onto the cartridge rib with the legs
downwards.
CAUTION Double check the staples are not
dirty or damaged.
• Close the cartridge pushing the cover. Block it with
the cartridge lock.
Air
intake
Cartridge
lock
CAUTION Before
Handle
Trigger
Staples
cartridge
A
Contact
lock
B
D
ENGLISH
C
7