Parts; Start Up - Truper ENNE-160 Instructivo

Parts

Air
Handle
intake
Trigger
Cartridge
lock
Staples
Contact
cartridge
lock

Start Up

Air Supply Connection
• Before connecting to the tool, connect the hose to the A
compressor and let some air run through the hose and
coupling, to verify both are clean.
B
• If a filter-oil feeder similar to the one recommended in
page 3 is not available apply a few drops of oil suitable for
tools into the air inlet (A).
• Connect the air hose to the tool with an empty cartridge
using a fast coupling (B). CAUTION Before
connecting the hose to the tool double check the staple
cartridge is empty.
• The fast coupling is very useful to quickly connect and
disconnect the tool and interchange them easily.
Cartridge Loading
• Disconnect the air hose from the tool.
• Open the cartridge cap (C) as indicated in the figure.
C
• Set the staples into the cartridge with the legs downwards.
CAUTION
Double check staples are not dirty or
worn.
• Close and secure the cartridge cap.
7
ENGLISH